CLT production DACH CZ IT 2023.jpg
cross-laminated timber production

CLT market keeps growing

Article by Günther Jauk (translated by Eva Guzely) | 08.11.2024 - 10:04

Manufacturers in the DACH region, Italy and the Czech Republic will produce 1.42 million m³ of cross-laminated timber this year. With this increase of 9% compared to 2023, it is another record year for the industry which managed to double its production output within just six years. The main reason for such strong growth in these challenging times are factories which either went into operation in recent years and gradually ramped up production or placed substantial volumes on the market for the first time in 2024.

Best Wood Schneider is doubling its production output at the newly founded Meßkirch site in Germany to 50,000 m³ within a year. Together with the existing factory at the headquarters in Eberhardzell/DE, the company will have an annual output of 75,000 m³ in 2024. Mayr-Melnhof Holz also recorded a significant increase thanks to its new site in Leoben, Styria. There, the company will raise its production volume from 10,000 to 40,000 m³ this year, while output at the site in Gaishorn/AT will be reduced by 10,000 m³ to 50,000 m³. This brings the total to 90,000 m³, which is less than half of the target capacity of over 200,000 m³ a year.

Mosser Leimholz, Randegg/AT, also started up a cross-laminated timber plant for 1.25-m-wide elements in 2023 and will double its output to 10,000 m³ in 2024.

Output at the relatively new production sites of HBS Berga (+10,000 m³ to 45,000 m³/year), Holzwerke van Roje (+12,000 m³ to 40,000 m³) and LOC Holz (+10,000 m³ to 30,000 m³) has also increased substantially.

The overall growth rate is somewhat distorted by the figure provided by Holzbauwerk Schwarzwald, Seewald/DE. The company put its factory into operation back in 2022, but first reported a target output of 35,000 m³ for 2024.

Newly launched sites in 2024

Even though it is not listed in the production statistics, Schilliger Holz’s new factory in France is still relevant for the DACH region. A few months ago, the Swiss cross-laminated timber pioneer started up an extremely sophisticated high-performance plant directly on the Rhine in Volgelsheim, which is designed not only for standard CLT but also for other new timber construction products.

The second site which was newly launched in 2024 is that of Cltech in Kaiserslautern/DE. The company was established in 2018 by carpenter Jürgen Gottschall with the mainstays of timber engineering, timber frame construction and mass timber construction with cross-laminated timber. With a flexible yet resource-saving CLT production concept, Cltech will now create even more added value.

More production sites planned

In June, traditional company Blumer Lehmann announced the construction of a glued timber plant at its headquarters in Gossau in eastern Switzerland. A glulam line is to be started up in September 2025, and the start of CLT production is scheduled for June 2026.

Ante Holz will build a cross-laminated timber production facility at its site in Rötenbach/DE, with an annual capacity of 80,000 m³. The company is currently still waiting and will only start in 2026 at the earliest.

In the near future, further medium-sized and large cross-laminated timber projects are likely to be announced in the DACH region, although none of them had been officially confirmed at the time of going to press.

To sum up, not only the actual production volumes but capacities, too, will continue to grow.

Cross-laminated timber production AT/DE/CH/CZ/IT | 2023 & target 2024
Glued products, volumes in m³
Company Location 2023 Target 2024 One-shift capacity Products & services Joint gluing Adhesive Types of wood for surface Format up to (m)
Agrop Nova Ptení/CZ 7,000 8,000 n/a high-quality visible quality, continuous top-layer lamellas of up to 10 m, ribbed elements with insulation, acoustic panels, façade panels with metal coating, panels with veneer surfaces, surface finishing for indoors/outdoors yes MUF/PUR spruce, larch, silver fir, old wood 2.95 x 12, 3.5 x 10
Artuso Legnami* Caselle TV/IT 30,000 30,000 30,000 PUR spruce
best wood Schneider Eberhardzell/DE 25,000 25,000 n/a yes PUR spruce widths of up to 1.20
best wood Schneider Meßkirch/DE 25,000 50,000 n/a yes PUR spruce widths of up to 3.50
Binderholz Bausysteme* Unternberg/AT, Burgbernheim/DE 220,000 200,000 110,000 BBS 125 system format, BBS XL large format with visible quality PUR spruce, larch, Swiss pine, silver fir, antique 1.25 x 24; 3.5 x 22
Cltech 1) Kaiserslautern/DE start of production in 2024, no cutouts for window and door openings during panel laying yes PUR spruce, Douglas fir, pine, larch 16 x 3.5
CLT Suisse Orges/CH n/a n/a n/a
Eugen Decker Morbach/DE 25,000 25,000 25,000 special structures and formats no PUR spruce, Douglas fir, pine 3.3 x 16
FHS Holzbau Grassau/DE, Veseli n.L./CZ 10,000 10,000 10,000 high-quality surfaces; ~ 20 types of wood; integration of wall and ceiling heating systems (carbon or water) possible with exclusive surface; prefabricated CLT staircases with A-quality PUR ~ 20, e.g. spruce, oak, Swiss pine, larch 3.3 x 12.6 (13.05 for ceiling elements)
Derix-Gruppe Niederkrüchten/DE, Westerkappeln/DE 35,000 35,000 n/a no MUF/PUR spruce, fir, larch 3.5 x 17.8
Hasslacher Gruppe Stall im Mölltal/AT 50,000 60,000 n/a X-Fix, surface finishing, Excellent surface, dimensions ordered = dimensions billed, all surfaces sanded on request MUF spruce, larch, pine, fir, Swiss pine, birch, oak  3.2 x 20
Hasslacher Gruppe Magdeburg/DE n/a n/a n/a up to 24 m without universal finger joints, sanded up to 20 m, otherwise planed, X-Fix, surface finishing, no standard lengths on request MUF spruce, fir 1.25 x 24
HBS Berga/DE 35,000 45,000 35,000 sanded surfaces, visible quality, joining yes PUR spruce 3.5 x 16
HBS Somplar/DE 20,000 20,000 15,000 elements of up to 3.9 x 19 m, joining no PUR spruce 3.9 x 19
HolzBauWerk Schwarzwald Seewald/DE n/a 35,000 20,000 all layers completely joint-glued and load-bearing; knot-free rift/visible-quality surface; silver fir; joining expertise yes PUR spruce, silver fir 3.5 x 16
Kurt Huber Achern/DE 5,000 5,000 7,000 individually to size yes PUR spruce, fir 3.8 x 19
KLH Massivholz Teufenbach-Katsch/AT, Wiesenau/AT 150,000 150,000 n/a on request: surface gluing with heat-resistant adhesive HB X, protective coatings and surface finishing, KLH Protect protective foil, KLH® Select silver fir
on request PUR all types of softwood, mostly spruce 3.5 x 16.5
Lignotrend Weilheim/DE 28,000 28,000 n/a customizable CLT (visible quality, acoustics, fire safety, sound insulation) n/a PUR silver fir, spruce, oak, etc. 2.5 x 18
LOC Holz Arbing/AT 20,000 30,000 23,000 knot-free visible-quality rift wood – non-cracking; knot-free rift surface/OF Supreme; wood moisture 8-10% dry; spruce/fir/larch; load-bearing narrow edge gluing; air-tight from 3 layers yes MUF spruce, fir, larch 3.6 x 16
Mayr-Melnhof Holz Gaishorn/AT 60,000 50,000 n/a at both sites: 3-9 layers (more on request), surface qualities: residential visible, industrial visible, non-visible; project-specific joining; in Leoben/AT: narrow edge gluing no MUF, PUR spruce 3.5 x 16
Mayr-Melnhof Holz Leoben/AT  2) 10,000 40,000 n/a at both sites: 3-9 layers (more on request), surface qualities: residential visible, industrial visible, non-visible; project-specific joining; in Leoben/AT: narrow edge gluing yes PUR spruce 3.5 x 16
Holz Meissnitzer Niedernsill/AT 4,000 4,000 2,000 no PUR spruce, fir 4 x 15
Mosser Leimholz 3) Randegg/AT 5,000 10,000 15,000 non-visible, industrial visible, residential visible; sanded surfaces yes PUR spruce 1.25 x 14
Pfeifer Group Schlitz/DE 60,000 60,000 30,000 planned PUR spruce 3.1 x 14.5
Rubner Holzbau Brixen/IT 7,500 10,000 n/a CNC joining, surface qualities: industrial, industrial visible, visible; surface impregnation, customizable panel structure no PUR spruce, larch 4.2 x 17, Dmax = 30 cm 
Schwarzwald Holzbausysteme Friesenheim/DE 18,000 18,000 12,500 color coating, loading with residential visible quality on the bottom, SBSplus elements with widths of 3.9 m with residential visible & industrial visible quality PUR spruce, larch, Douglas fir, silver fir 3.9 x 16.2
Schilliger Holz  Küssnacht/CH 40,000 40,000 n/a other CLT factory in Volgelsheim/FR, same performance & figures as in Küssnacht/CH; production of panels in sizes of up to 3.4 x 16 m yes PUR spruce, fir, Douglas fir 3.4 x 14
Pius Schuler Rothenthurm/CH n/a n/a n/a n/a n/a n/a spruce, fir, pine, larch  3 x 9
Stora Enso 4),* Bad St. Leonhard/AT 70,000 70,000 n/a visible, industrial visible, non-visible; sanded, air-tight from 3 layers, production of ribbed elements; automated coating line in Ybbs in operation since 2024 yes PUR spruce, pine, fir 2.95 x 16; 3.95 x 16 (on request)
Stora Enso 4),* Ybbs/AT 95,000 95,000 n/a visible, industrial visible, non-visible; sanded, air-tight from 3 layers, production of ribbed elements; automated coating line in Ybbs in operation since 2024 yes PUR spruce, pine, fir

2.95 x 16; 3.95 x 16 (on request)
Stora Enso 4),* Ždírec/CZ 50,000 50,000 n/a visible, industrial visible, non-visible; sanded, air-tight from 3 layers, production of ribbed elements; automated coating line in Ybbs in operation since 2024 yes PUR spruce, pine, fir

widths of up to 3.5 m
Theurl Austrian Premium Timber Steinfeld/AT 70,000 75,000 n/a narrow edge gluing, visible, enhanced industrial, industrial quality, optimization of loading space, 4 CAD systems: SEMA, Dietrich’s, cadwork, hsbCAD yes PUR spruce 3.5 x 16
Holzbau Unterrainer Ainet/AT 8,000 8,000 5,000 curved CLT (“radius timber”) with min. radius of 2 m no PUR spruce, larch, Swiss pine 2.95 x 13.5
Holzwerke van Roje Oberhonnefeld/DE 28,000 40,000 30,000 joining, visible qualities, protective foils for the duration of construction no PUR spruce, Douglas fir, larch 3.5 x 16
Weinberger Holz  Reichenfels/AT n/a n/a n/a non-settling log-house planks crosslam (cross-laminated beams), Bilam forte yes PUR spruce, larch, pine, Swiss pine 1.2 x 13.5
Xlam Dolomiti Castelnuovo/IT 26,000 30,000 25,000 production of ribbed elements; prefabricated floor and ceiling elements, planning and construction yes PUR spruce 3.5 x 13.5
Ziegler Holztechnik Hermsdorf/DE 35,000 36,000 17,500 joining and pre-assembly possible yes MUF spruce, pine 3 x 16.5
ZÜBLIN Timber  Aichach/DE 30,000 30,000 13,000 type approval, LENO-ADD, CLT formwork no/on request for top layer PUR softwood, fine wood, Fineline 4.8 x 19.8
Total** 1,301,500 1,422,000  
Partially glued products, volumes in m³ 2023 Target 2024 Products & services Connection Types of wood Format up to (m)
H.R.W. Vollholzwandsystem, Peiting/DE 25,000 25,000 –  n/a spruce, fir, Douglas fir n/a
Mechanically connected products, volumes in m³
Rombach Nur-Holz, Oberharmersbach/DE n/a n/a –  beech screws spruce, fir, Swiss pine, larch, Douglas fir 3.2 x 12
Thoma Holz100, Lahr/DE, Stadl/AT n/a n/a wood harvested in line with the lunar calendar, Wood100 system beech dowels spruce, fir, pine, larch 3 x 8
Diestelmeier-Witte Massivholzbau, Seevetal/DE; GT Holzbau, Lavamünd/AT; Holz Meissnitzer, Niedernsill/AT; Abbundzentrum Dahlen, Dahlen/DE; Das Naturholzhaus, Dinkelsbühl/DE; Holz in Form, Rothenkirchen/DE; Holzbau Binz, Ellwangen-Pfahlheim/DE; Herrmann Massivholzhaus, Geisa an der Rhön/DE; Hoch4 Holzbau, Oelde/DE; Inholz, Mannheim/DE; Rottmüller Systemholz, Bad Aibling/DE; Reichart Holzbautechnik, Oberstaufen/DE; R3 Massivholzbau, Asch-Fuchstal/DE; Nikro, Marxen/DE; Sterk Holzhaus, Bodnegg/DE; Teredo Vollholzhaus, Waffenbrunn/DE; Thumann Holzbau, Berg-Hausheim/DE; Veit-Fröhler Bau, Hutthurm/DE; Zimmerei Bauerschmitt, Eltmann-Dippach/DE; Zimmerei Karrer, Woringen/DE; Zimmerei Mayr & Sonntag, Legau/DE; Gauye & Dayer, Sion/CH; Haudenschild, Niederbipp/CH; FBE, Castelgomberto/IT  50,000 50,000 total production volume of companies which produce the “Massiv-Holz-Mauer” wall system in the DACH region aluminum grooved pins European softwoods; surface: spruce, Swiss pine, fir 4 x 6