Glulam-production-DE-AT-2008-2025.png

Source: Holzkurier market research © Timber-Online.net

germany / austria

Glulam production stable at a high level

Article by Günther Jauk (translated by Eva Guzely) | 13.05.2026 - 13:45
Glulam-production-countries.png

Source: Holzkurier market research © Timber-Online.net

For the current year, producers are planning a further increase of 3% to an output of nearly 3 million m³ – which would be a new record level. Austrian manufacturers are the main drivers of growth in 2025, with a year-on-year increase of 30,000 m³, or 2%, that brings the full-year output to 1.54 million m³. Binderholz recorded the strongest growth: In Jenbach/AT, the largest single glulam production site in the DACH region, the Tyrolean company increased production by 15,000 m³ to 280,000 m³. As for 2026, Binderholz plans to keep production stable at this level.

Mayr Melnhof Holz in Gaishorn/AT (160,000 m³) and Mosser in Randegg/AT (170,000 m³) each increased their production output by 10,000 m³. Meanwhile, Stora Enso produced significantly less glulam at its site in Ybbs/AT. At 40,000 m³, output was 12,000 m³ below the 2024 level.

Growth in Bremerhaven

In Germany, Cordes’s production site in Bremerhaven recorded the biggest increase. Commissioned in 2022, the factory reported a glulam output of 70,000 m³ last year, up from 50,000 m³ in 2024. This year, Cordes is planning to produce 80,000 m³ there. 

Thüringer Holzwerke Hermsdorf reported the sharpest decrease. Output at the former Ziegler site halved compared to 2024, totaling only 25,000 m³.

Two small companies exit, one big newcomer enters the stage

Insolvent company Holzbau van Kempen, Oelde/DE, will be featured in the Holzkurier’s glulam table for the last time. In April, it was decided to close the production site. Current orders are to be processed by summer. Van Kempen produced around 3,000 m³ of glulam a year. 

The situation of Zechner Lärchen-System-Holz in Reichenfels/AT is similar. Founded in 2018, the company, with an annual output of a few thousand cubic meters, is no longer producing and plans to terminate its operations at the end of the year. 

Timber construction company Hörmann, which specializes in the construction of halls, caused quite a sensation. Not far from its headquarters in Buchloe/DE, the company is building an integrated production facility on a 12-hectare site, including a sawmill, a glulam plant with a joinery area, and pellet mill. The glulam line is scheduled to go into operation in 2027 and will have an annual capacity of approximately 60,000 m³. Hörmann manufactures around 700 halls a year. According to estimates by the Holzkurier, this construction volume makes the company the largest single buyer of glulam in Germany, with an annual demand of at least 30,000 m³.

Glulam-exports-map.png

Glulam exports from Germany and Austria in 2025. Source: Statistik Austria, Destatis © Timber-Online.net

91% export share in Austria

Glulam-volumes-AT-DE.png

Source: Statistik Austria, Destatis, Holzkurier © Timber-Online.net

More than nine out of ten cubic meters of glulam produced in Austria left the country in 2025. Specifically, a total of 1.4 million m³ were exported, mostly to neighboring Italy (625,000 m³), Germany (224,000 m³) and Switzerland (124,000 m³). Japan was the most important non-European export market with a trade volume of 81,000 m³. 

If you add the small import volume to production output and then subtract exports, the result is domestic consumption of 169,000 m³ – assuming constant inventories. 

Germany exported almost half of its 2025 production output, i.e. 656,000 m³. The majority was sold to Switzerland (252,200 m³) and France (105,000 m³). 

Comparing the production volume with imports and exports results in domestic consumption of 1.06 million m³. This corresponds to almost 80% of the glulam produced.

Market situation remains tense

The glulam market is characterized by stagnation and high pressure on prices. Producers did attempt to raise prices by around €25/m³ but failed. According to industry experts, the mere announcement of these increases prompted some customers to halt any orders. At the end of April, prices in Germany and Italy therefore remained within a range of €550 to €575/m³. 

Glulam lamellas also came under pressure. The most recently observed price range was €322 to €338/m³, with Scandinavian suppliers in particular representing the lower end of the price scale.

The increase in sales volumes anticipated after Easter largely failed to materialize. Some market participants even described the business situation as weaker than before the holidays. However, a mixed picture emerges at a regional level: In southern Germany, the order situation is described as good, even though industrial-grade products are in short supply there. In central and northern Germany, activity remains at a much lower level. With stable lead times of seven to ten days, market participants expect prices to remain largely unchanged in May.

Glulam production Germany and Austria | 2025/target 2026

Glulam production in 2025 and 2026 and information on the type of glulam as well as products and services, volumes in m³

Company Location Production 2025 Target 2026 One-shift capacity Types of wood Adhesive Strength class Length List Joining Products and services
AUSTRIA
Hannes Bichler Kobenz 2,000 2,000 2,000 spruce PUR GL24h 12 yes no –
Binderholz Jenbach 280,000 280,000 110,000 spruce MUF GL24-32 32.5 yes yes profiled sanded ceiling, CNC, curved components
Handlos Tragwein 68,000 70,000 n/a spruce/pine/larch MUF GL24-32 22 yes yes Duo/Trio, log house planks, pressure impregnation, solid structural timber
Holz Hahn Rappottenstein 45,000 50,000 n/a spruce MUF/PUR GL24-28 24 yes no Duo/Tio, solid structural timber, ceiling elements
Huter & Söhne Innsbruck n/a n/a n/a spruce/larch MUF GL24-32 41.5 yes yes block gluing, special structures, curved components, min. radius 1 m, CE, PEFC, width up to 32 cm, bonded concrete reinforcement connection, EPD
Kirnbauer Holzindustrie Ternitz 90,000 90,000 n/a spruce/pine PU GL24, GL28 18 yes no Duo/Trio, solid structural timber, ceiling elements
Kulmer Holz-Leimbau Pischelsdorf 2,800 2,500 10,000 spruce MUF GL24-28 40 yes no Kielsteg ceiling elements with a max. length of 35 m
Mayr-Melnhof Holz Gaishorn 160,000 170,000 n/a spruce MUF GL24-30 23 yes yes PEFC, CE acc. to EN 14080:2013, Baubiologisches Gütesiegel (IBR Rosenheim), UKTA-0836-23/6616 & UKAD 130005-00-0304, 1245-CPR-4008, Duo/Trio
Mayr-Melnhof Holz Reuthe 30,000 34,000 n/a spruce/larch MUF GL24-32 32 yes yes PEFC, CE, acc. to EN 14080:2013, DIN 1052-10, curved beams with min. radius of 3 m, CNC joining, block-glued special components
Mosser Leimholz Randegg 170,000 1800,00 n/a spruce MUF GL24-30 18 yes yes Duolam, PEFC
Hasslacher Gruppe Sachsenburg Hermagor 160,000 170,000 n/a spruce/pine/larch MUF GL24-32 40 yes yes CNC joining, ceiling elements, curved beams, special structures, Duo/Trio
Obermayr Schwanenstadt 5,500 5,500 n/a spruce/larch/fir MUF GL24-30 40 yes yes special structures, block gluing, ceiling elements, curved beams, PEFC, max. width 30 cm
Johann Pabst Holzindustrie Zeltweg 100,000 100,000 n/a spruce MUF GL24-30 36 yes yes CNC joining, wall and ceiling elements, curved beams
Pfeifer Holz Imst 120,000 120,000 70,000 spruce MUF GL24-32 24 yes no strength class sorting by machine
Rubner Holzbau Ober-Grafendorf 38,000 37,000 20,000 spruce/pine/larch MUF GL24-32 50 no yes PEFC, certificate: A, B, C1, C2, D
Stora Enso Brand 45,000 45,000* n/a spruce/pine EPI E95-F3152 4 no no JAS-certified posts
Stora Enso Ybbs 40,000 40,000* n/a spruce/pine EPI E95-F3152 6 no no JAS-certified posts
Theurl Austrian Premium Timber Assling 100,000 100,000 150,000 spruce MUF GL24, GL28, GL32 18 yes yes –
Wiehag Altheim n/a n/a n/a – – – 55 yes yes Timber engineering, production, assembly, project management
Weinberger Holz Abtenau 55,000 55,000 22,500 spruce/pine/larch PU up to GL32h 18 yes no glulam up to GL32h, Duo beams up to C30, larch glulam
Reichenfels 25,000 25,000 spruce/pine/larch/Douglas fir 14 BSH up to GL32h, Duo beams up to C30, larch glulam, non-settling log house planks, primolam
Zechner Lärchen-System-Holz Reichenfels n/a n/a n/a larch MUF GL24h 13 no no 2026: production ceased
Glulam production in Germany and Austria | 2025/target 2026
Glulam production in 2025 and 2026 and information on the type of glulam as well as products and services, volumes in m³
Company Location Production 2025 Target 2026 One-shift capacity Types of wood Adhesive Strength class Length List Joining Products and services
GERMANY
ante-holz Somplar  55,000* 55,000* 35,000* spruce/fir/pine/Douglas fir MUF/PU GL24-30 18 yes yes CE, PEFC, solid structural timber, Duo/Trio, glulam
Aumann Holzwerk Ziemetshausen 45,000 45,000 30,000 spruce/fir PU GL24-32 18 yes yes solid structural timber, Duo/Trio, glulam, CNC joining
Xaver Bullinger Abtsgmünd 27,000 27,000 13,000 spruce/fir/larch/Douglas fir PU GL24/28 16 yes yes combination of glulam, Duo, solid structural timber
Holzwerke Bullinger Werder 88,000 90,000 50,000 spruce/pine/larch MUF GL24-28-30-32 40 yes yes block gluing + CNC joining up to 60 x 130 cm, GLVL
Burgbacher Holztechnologie Trossingen 2,500 2,500 2,500 spruce/larch/Douglas fir/oak/Accoya MUF/PRF GL24-30 14 no yes curved/twisted construction elements from 50 cm, free forms, special construction elements, finger-jointed frames, block gluing
Cordes Holz Bremerhaven 70,000 80,000 35,000 spruce/pine/larch/Douglas fir PU GL24-32 16 yes yes Ceiling elements, block gluing, special profiles, impregnation, glulam, Duo/Trio, solid structural timber, FSC + PEFC

 

Eugen Decker

Morbach 100,000 100,000 n/a spruce/Douglas fir/larch/pine MUF/PU GL24-28 16 n/a n/a CE, solid structural timber, Duo, CLT, PEFC, automatic quality grading
Derix-Gruppe Niederkrüchten, Westerkappeln 45,000 45,000 n/a spruce/larch MUF GL24-30 65 yes yes CNC joining: up to 75 m, CE, PEFC, Duo, wood-concrete composite, block gluing, ribbed ceilings, biobased glue, carbon credits
Feyler Sonnefeld 10,000 10,000 10,000 spruce/larch MUF GL24-32 46.5 yes yes Fir/pine/Douglas fir on request, special structures, block gluing, renovation glulam
Holzbau Gröber Füramoos 9,700 12,000 12,000 spruce MUF GL24-30 45 yes yes special components, CNC joining
Grossmann Bau Rosenheim 10,000 10,000 n/a spruce/larch MUF GL24-32 45 n/a yes FSC, PEFC, CE, DIN 1052-10 Certificates: A/B/C2/D, wood-concrete composite, special structures, block gluing, construction elements, Baubuche components, curved beams, finger-jointing, ceiling elements
Haas Fertigbau Falkenberg 20,000 20,000 n/a spruce MUF GL24-32 45 yes yes Curved construction elements, block gluing, CNC joining, finger-jointed frame corners, ceiling elements, timber frame construction
Hasslacher Gruppe Magdeburg, Kleinheubach 155,000 165,000 n/a spruce/fir/larch/oak/beech/Accoya MUF/EPI/PU GL24-32 ∞1 yes yes Ceiling elements, Duo/Trio, special structures in BauBuche, columns, 6-axis CNC, 3D glulam, hybrid
Hirtreiter Holzbau Leiblfing n/a n/a n/a spruce MUF/PU GL24-32 43 yes yes CE, finger jointing, block gluing, log house planks, curved beams, construction elements, ceiling elements, glulam elements, joining, special structures, wood-concrete composite
Hördener Holzwerk Gaggenau 8,800 8,000 n/a spruce MUF/PU GL24-28 15 yes yes solid structural timber, DUO/TRIO, log house planks, PEFC
HS Timber Productions Kodersdorf 40,000* 40,000* n/a –  -  -  -  -  - Start of production in 2024
Junginger Naturholzwerk Gaildorf 30,000 30,000 15,000 spruce PU GL24-30 16.5 yes yes CNC joining up to a width of 1,250 mm, profiled glulam ceiling elements, solid structural timber, Duo/Trio, glue-laminated beams
Ladenburger Holzwerke Bopfingen 135,000 140,000 n/a spruce MUF GL24-32 24 yes yes Duo/Trio, glue-laminated beams, glulam, solid structural timber, CE PEFC, joining
Jakob Maier Türkheim 5,000 5,000 5,000 spruce/larch/Douglas fir MUF GL24-30 33.5 yes yes Gable roof trusses, arches, spruce/larch/Douglas fir glulam, block gluing, round columns, finger-jointed frames, PEFC, CE
Mayr-Melnhof Holz Olsberg 25,000 30,000 n/a spruce/larch MUF GL24-32 56.3 no yes PEFC, CE, acc. to EN 14080:2013, EN 14081:2005 + A1:2011, DIN 1052-10, EN 338, CNC joining, beams up to a length of 56 m, glued mass timber system elements, block-glued special construction elements, BRL 1701 Komo
Mayr-Melnhof Holz Wismar 120,000 130,000 n/a spruce MUF GL24-30 18.1 yes yes PEFC, CE, acc. to EN 14080:2013, DIN EN ISO 50001: 2018, EPD environmental product declaration acc. to ISO 14025 and EN 15804+A2, CNC joining, fully automatic order picking, glued wall studs, glued mass timber system elements
Merkle Holz Nersingen 19,400 23,000 n/a spruce/larch MUF GL24-28 18 yes yes CNC joining, solid structural timber, Duo/Trio 
Rettenmeier Holzindustrie Hirschberg 48,000 48,000 20,000 spruce PU GL24h- GL32h 16 yes no Solid structural timber / solid structural timber acc. to list / Duo+Trio both in spruce & Douglas fir, ceiling elements, tongue-and-groove profiles, special profiles, impregnation – batch size one possible
Schaffitzel Holzindustrie Schwäbisch Hall 10,000 10,000 10,000 spruce/larch/Douglas fir/Accoya/pine MUF GL24-30 45 yes yes CE, PEFC, structural analysis, construction kits, epoxy post supports, block gluing, curved beams; wood-concrete composite; CNC joining; special structures, construction of halls and bridges; renovation
Schmelter Lennestadt 20,000 22,500 15,000 spruce PUR GL24h,c, GL28c, GL30c 18 yes yes also solid structural timber/Duo/Trio list and glulam elements, millimetric cross-cutting, PEFC-certified
Best Wood Schneider Eberhardzell 150,000 160,000 55,000 spruce/larch/Douglas fir PU GL24-28 18 yes yes Duo/Trio, ceilings with color finish, box ceilings, joining
Gebr. Schütt Landscheide 6,000 6,000 7,800 spruce/larch PU/MUF GL20-30 41 yes yes CE, PEFC, planning, structural analyses, CNC, timber frame construction, renovation
Rothmund Leimholz Klettgau-Bühl 11,000 11,000 6,000 spruce/fir/Douglas fir MUF GL24, 28 18 yes no CE, PEFC, Duo beams
Schwörer Holz Hohenstein 35,000 35,000 25,000 spruce MUF GL24 26 no no CE, PEFC, quality label BS-Holz, glulam elements, Duo/Trio
Timmermann Kamen n/a n/a n/a spruce MUF GL20-32 22 no yes specialized in the construction of halls
Thüringer Holzwerke Hermsdorf Hermsdorf 25,000 25,000 12,500 spruce/larch MUF bis GL32h 50 no yes special glulam constructions only, up to 50 m, block gluing possible
Holzbau van Kempen Oelde n/a n/a n/a spruce/larch/oak/Kebony MUF/PU GL24h-30c 38 yes yes 2026: insolvency, business will be closed; production to be terminated by summer 2026
Vente Holz Finnentrop 24,000 24,000 12,000 spruce/larch PU GL24-28 18 yes yes Duo/Trio, acc. to list, PEFC, glulam ceilings
Wiedmann Rheinfelden n/a n/a n/a spruce/Douglas fir/larch/fir MUF GL24-32 40 yes yes Curved beams, bridge beams, structural analysis, construction kits, PEFC
Josef Ziegler Plößberg 5,000 5,000 3,000 spruce n/a GL24-28 15 yes no solid structural timber acc. to list, glulam
Holzleimbau Zischka Böblingen 1,000 n/a 1,000 spruce/larch/Douglas fir/fir PU/MUF/PRF bis GL30 24 yes yes curved special construction elments with a min. radius of 70 cm